Evolv Crate Doors and Panels: Customize Your Multi-Dog Setup

Quick Answer

To customize your Diggs Evolv crate for multiple dogs, start by measuring your space and each dog, then choose the right size and configuration of Evolv Doors & Panels add-ons. Use the add-on panels to connect or reconfigure crates, and always verify the size and configuration match your existing Evolv model.

Living with multiple dogs means finding a crate setup that gives each pup its own safe space without turning your home into a kennel. The Diggs Evolv crate was designed to look like furniture, and its modular doors and panels let you adapt the layout as your pack changes.

Whether you're bringing home a new puppy or rearranging your living room, understanding how Evolv doors and panels work can save you from buying a second crate that doesn't fit your space or your dogs. This guide walks through the practical steps to customize your Evolv setup for a multi-dog home.

Measure Your Space and Your Dogs

Before ordering any add-on panels, measure the area where you plan to keep the crates. Consider the footprint of each Evolv crate and how much clearance you need for doors to swing open. If you're connecting crates side by side, you'll need enough wall space to accommodate the combined width.

Next, measure each dog from nose to tail and from floor to the top of their head while sitting. This ensures you choose the correct Evolv size for each dog. The Evolv Dog Crate is available in Small, Medium, Intermediate, and Large sizes, so matching the size to your dog's measurements is the first step to a comfortable setup.

• Leave at least 6 inches of clearance around each crate for airflow and easy access.

Choose the Right Panel Configuration

The Diggs Evolv Doors & Panels add-ons come in different configurations: Rear Panel, Side Panel, or Front/Rear Door. Decide which side of each crate needs a door based on how you'll access it in your layout. For example, if two crates sit side by side, you might want the doors on the outer sides only.

If you plan to connect crates, you may want to remove the side panel between them to create a shared space, or keep it in place for separate zones. The add-on panels let you replace or customize your crate's panels and doors, so you can create a layout that works for your dogs' needs.

• Think about cleaning: removable panels make it easier to reach every corner.

Order the Correct Size and Configuration

When ordering Evolv Doors & Panels, you must select the size that matches your Evolv crate model. The add-ons are available for sizes S, M, I, and L, so double-check your crate's size before purchasing. Also choose the configuration that matches your setup—rear panel, side panel, or front/rear door.

A common mistake is assuming all panels are interchangeable across sizes. They are not. Using the wrong size panel can compromise the crate's structure and your dog's safety. Always verify the size and configuration against your existing Evolv crate.

• Keep your crate's original size label or order confirmation handy when ordering parts.

Plan a Layout That Grows With Your Dogs

If you have a puppy and an adult dog, consider a layout that allows the puppy's crate to be expanded later. The Evolv Base Frame/Playpen Frame add-on can convert a crate into an open-top play area, which is useful for supervised playtime. You can also use the add-on panels to reconfigure the crate as your dog grows.

For multiple adult dogs, you might prefer separate crates in different rooms to give each dog quiet time. Or, if your dogs get along well, you could place crates side by side so they can see each other. The flexibility of Evolv doors and panels lets you change the arrangement without buying a whole new crate.

• Think about future changes: a layout that works today may need adjustment in six months.

Step-by-Step: Customizing Your Evolv Crate for Multiple Dogs

1. Measure your space and dogs: Measure the floor area for the crates and each dog's body length and height. This determines the crate size and how many crates can fit. Checkpoint: Write down the measurements and compare them to the Evolv size chart before ordering.
2. Decide on the layout: Sketch a simple floor plan showing where each crate will go. Decide which sides need doors and whether you want to connect crates or keep them separate. Checkpoint: Make sure doors can open fully without blocking walkways.
3. Order the correct add-on panels: Select the Evolv Doors & Panels that match your crate size and desired configuration. Double-check the size (S, M, I, L) and configuration (rear panel, side panel, front/rear door) before purchasing. Checkpoint: Verify the size and configuration against your Evolv crate model to avoid returns.
4. Install the panels and test the setup: Follow the manufacturer's instructions to swap panels or add doors. After installation, test that all latches close securely and there are no gaps. Checkpoint: Give each dog a trial run to ensure they are comfortable and the crate is stable.

Products That Help You Customize

• Evolv Doors & Panels - Add-Ons: Diggs Evolv Doors & Panels are add-on spare parts designed to fit your Diggs Evolv crate. Choose the size and configuration that matches your setup to replace or customize your crate’s panels and doors. Available in sizes S, M, I, and L to fit your Evolv crate model. Select from Rear Panel, Side Panel, or Front/Rear Door configurations depending on your needs. This is the key product for customizing your crate layout. You can swap a solid side panel for a door or reconfigure the entrance to suit your multi-dog arrangement.
• Evolv Doors & Panels - Spare Parts: Diggs Evolv Doors & Panels spare parts let you replace or reconfigure your Evolv crate with genuine components. Choose the size and configuration that matches your setup. Available for sizes S, M, I, and L. Options include front/rear doors, rear panels, and side panels. If you already have an Evolv crate and need to change its configuration, these spare parts allow you to do so without purchasing a new crate. They are also useful for replacing damaged panels.
• Evolv Dog Crate: The Diggs Evolv Dog Crate is thoughtfully designed to blend into your home while providing a secure and comfortable space for your dog. Available in Small, Medium, Intermediate, and Large sizes, this crate offers a versatile solution for dogs of different breeds and sizes. Choosing the right base crate size for each dog is the foundation of your multi-dog setup. The modular design means you can later add doors and panels to adapt the layout.
• Evolv Base Frame/Playpen Frame: Evolv is the first 2-in-1 Dog Crate and Playpen, offering a transformative experience with our Playpen Frame add-on. Easily replace your Evolv's ceiling mesh to shift from crate to an open-top, secure play area, ideal for both crate training and interactive play. This add-on gives you even more flexibility. You can turn one crate into a playpen for supervised group time, then switch it back to a crate for rest.

Customizing your Diggs Evolv crate with the right doors and panels lets you build a multi-dog setup that fits your home and your dogs' needs. With careful measuring and the right add-ons, you can create a flexible, safe space that adapts as your pack grows.